Striking tools – Mallets, pin punches, chisels – PB Swiss Tools

Striking tools

Robust and durable

PB 800

8 Products
Flat chisel, red powder coated
- for working on unhardened steel, concrete, masonry, for removing welding beads, mortar residues, etc.
- flat-oval shaft with wide, sharp blade, avoid heating up to over 200 °C when sharpening
- powder coated, non-slip and with permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 803

1 Products
Slot chisel, red powder coated
- extra-thin blade, effective splitting and working
- flat-oval shaft with wide, sharp blade, avoid heating up to over 200 °C when sharpening
- powder coated, non-slip and with permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 804

1 Products
Slot chisel, additional lateral cutting edge, red powder coated
- extra-thin blade, effective splitting and working
- flat-oval shaft with wide, sharp blade, avoid heating up to over 200 °C when sharpening
- powder coated, non-slip and with permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 804 Bent

1 Products
Curved slot chisel, additional lateral cutting edge, red powder coated
- extra-thin blade, effective splitting and working
- added space between chisel and workpiece thanks to curved shaft, safe handling
- flatter supporting angle, enables force to be applied accurately, prevents damage to the working surface
- flat-oval shaft with wide, sharp blade, avoid heating up to over 200 °C when sharpening
- powder coated, non-slip and with permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 805

6 Products
Flat chisel
- for working on unhardened steel, concrete, masonry, for removing welding beads, mortar residues, etc.
- octagonal shaft with sharp blade, avoid heating up to over 200 °C when sharpening
- chrome-plated, permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 815

6 Products
Cross-cut chisel
- for chiseling out narrow grooves and cleaning inner edges
- octagonal shaft with narrow, wedge-shaped blade, avoid heating up to over 200 °C when sharpening
- chrome-plated, permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 820

10 Products
Electrician’s flat chisel
- for general chiseling and demolition work with targeted force transmission
- for removing protruding concrete or mortar residues
- octagonal shaft with sharp blade, avoid heating up to over 200 °C when sharpening
- chrome-plated, permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 820 HG

2 Products
Electrician’s flat chisel, with handle
- for general chiseling and demolition work with targeted force transmission
- for removing protruding concrete or mortar residues
- octagonal shaft with sharp blade, avoid heating up to over 200 °C when sharpening
- chrome-plated, permanent corrosion protection
- sliding handle with soft surface, anti-vibration protection, pleasant grip
- non-slip surface, safe and precise working, comfortable to use
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
New

PB 8820 DN

1 Products
SwissGrip electrician’s flat chisel with going-through blade
- for general chiseling and demolition work with targeted force transmission
- for removing protruding concrete or mortar residues
- octagonal shaft with sharp blade, avoid heating up to over 200 °C when sharpening
- chrome-plated, permanent corrosion protection
- bulls eye effect due to reduced impact cap, lettering constantly legible
- convex handle with soft surface, pleasant grip and high torque transmission
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 825

3 Products
Electrician’s pointed chisel
- for working with hard materials such as concrete, bundled and pinpoint transmission of punching force
- octagonal shaft with sharp blade, avoid heating up to over 200 °C when sharpening
- chrome-plated, permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 850 BL

2 Products
Flat and cross-cut chisel, center punch, drift punches, set in practical plastic holder
- for reliable separation, knocking off, chiseling out, punching, knocking loose or drift punching
- chisel with sharp blade, avoid heating up to over 200 °C when sharpening
- drift punch with conical pin, concave tip, prevents slipping or sliding off the nail head
- precisely machined center punch, high hardness, extremely hard-wearing
- chrome-plated, permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 855 BL

2 Products
Flat and cross-cut chisel, center punch, drift punches, set in practical plastic holder
- for reliable separation, knocking off, chiseling out, punching, knocking loose or drift punching
- chisel with sharp blade, avoid heating up to over 200 °C when sharpening
- drift punch with conical pin, concave tip, prevents slipping or sliding off the nail head
- precisely machined center punch, high hardness, extremely hard-wearing
- chrome-plated, permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 860 H

1 Products
Flat and cross-cut chisel, center punch, drift punches, scriber, set with table stand
- for reliable separation, knocking off, chiseling out, punching, knocking loose or drift punching
- chisel with sharp blade, avoid heating up to over 200 °C when sharpening
- drift punch with conical pin, concave tip, prevents slipping or sliding off the nail head
- precisely machined center punch, high hardness, extremely hard-wearing
- chrome-plated, permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 870 CN

1 Products
Flat chisel, center punch and drift punch, Set in Self-Service Packaging
- for reliable separation, knocking off, chiseling out, punching, knocking loose or drift punching
- chisel with sharp blade, avoid heating up to over 200 °C when sharpening
- drift punch with conical pin, concave tip, prevents slipping or sliding off the nail head
- precisely machined center punch, high hardness, extremely hard-wearing
- chrome-plated, permanent corrosion protection
- tempered drive head, prevents splinters according to applicable standards
- high hardness, ensures exceptional retention of sharpness and long service lives
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe
PB 873 CN

1 Products
Safety pin punch, drift punch, knurled, set in self-service packaging
- for safe drift punching of rivets, pins, bolts or connecting elements
- cylindrical pin with outstanding hardness and toughness, extremely hard-wearing
- tempered drive head, prevents splinters according to applicable standards
- round, knurled shaft, secure hold in wet or oily environments
- made from round steel – especially practical and slim
- special alloy based on spring steel, hard and tough for long service life
- laser-marked serial number, lifetime guarantee
- pay attention to the safety regulations when working with striking tools: www.pbst.ch/safe